Mold rack is mainly used for placing all kinds of plastic molds, metal molds, die casting molds, powder metallurgy molds, extrusion molds

Mold shelf is a kind of shelf, referred to as: mold shelf, mainly store a variety of mold items, according to the loading capacity requirements are divided into light mold shelves and heavy mold shelves. Mold rack is mainly used for placing all kinds of plastic molds, metal molds, die casting molds, powder metallurgy molds, extrusion molds. The top of the shelf can be configured with a mobile hoist car to facilitate the lifting of the mold. Mold shelves, also known as mold shelves or drawer shelves, mainly store a variety of mold items, the top of the shelf can be configured with mobile hoist car to facilitate the lifting of the mold. Safe and reliable additional safety device; Easy to operate with bearing combination, sliding balance and independent lifting device; Save space, covers an area of 1.8 square meters, can store dozens of sets of small and medium-sized molds; Simple structure, assembled by a variety of combined parts, easy to disassemble, transport and assembly; Drawer type mold rack each compartment each layer bearing 800-1000KG; Save space, each box can put multiple sets of molds, convenient mold maintenance management and search; The drawing plate of the mold frame can be easily pumped after bearing the load, and the upper and lower intervals can be adjusted at will. The access work can be easily and quickly completed with the equipped block and manual hoist. The mold frame adopts detachable structure, all accessories can be arbitrarily combined, upper and lower spacing, easy disassembly and assembly.

Several characteristics of mold storage system:

1, combined assembly, mainly by the column, guide slot, drawer layer, tie rod, positioning pin, etc., using bolt connection, stable structure, safe and reliable, row use.

2, drawer tray is mainly composed of slide rail, drawer tray. The drawer tray is composed of a frame and steel plate welded by rectangular pipe and bending parts.

3, the drawer tray of the mold shelf for safety considerations, designed the positioning pin and limit pin, to ensure that the drawer tray in the withdrawal to ensure safety.

4, lightweight mold shelf layer load in 200 to 800kg/ layer. Heavy drawer shelves are loaded in: 800 to 1500kg/ layer.

5, the mold shelf covers a small area, the layer is significant, the classification is detailed, the operation is simple.

6, mold shelves can also be made on the beam of the shelf drawer, cost and savings, the structure is more stable.